All equipment, in the market, with electric or electronic components, are subject to the EMC (Electromagnetic Compatibility) directive. Therefore, to comply the demanded normative it is obligatory to take the appropriate protection measures. 
          The wide range of products manufactured by EMIKON offers the best guarantees, either in standard products, or in special products. EMIKON has become a competent and consolidated manufacturer in the market.

          The Output Chokes can be used in combination with line filters to diminish the electromagnetic interference. 
          They are specially effective when the interferences radiated by the connection driver to the motor, cause disturbances in the control systems, data lines or radio and television receivers located near the installation. The setting up of the appropriate choke in the connection cable to the motor, can solve this kind of problems.

          These filters of EMIKON are designed, specifically, for general uses. They are effective filters to protect the different electric and electronic equipment against transitory or similar interferences of the own line. 
          The different electrical and mechanical characteristic, of this range of filters manufactured by EMIKON, allows to select the appropriate filter according to the mechanical limitations of the own equipment and the electromagnetic conditions of each atmosphere.

           The frequency inverters for the speed control of the AC motor, nowadays, in all industrial areas are to be find and in different applications such as bombs, air conditioning systems, scheme tool and in industrial automation in general.
          The frequency inverters uses technical as PWM, output voltage quick pulses, etc... These techniques have some disadvantages like motor oneheat, high levels of electromagnetic interference and the necessity of expensive shielded cables.
          The senoidal output filters for frequency inverters are designed in order to provide a complete solution to all these problems.

          The FCD / FCE filters are foreseen for the assembly in distribution cabinets and are thought to be coupled  to normalised support profiles NS-35.
          To Limit the possibility of parasitic tensions connection is advisable to mount the filter nearly to the equipment that have to be protected, so that the connection cables will be as short as possible.

          EMIKON manufactures these inductive components under the international standards (VDE, SEMCO, IEC, etc.) or under special standards according to demand.
          This products are address to these application foolds such as: Radio and TV, high fidelity, telecommunications and informatic, as well as illumination, automobile electronic, appliances and industrial electronic.
          Chokes for filtration of input and output line interference, manufactured with a toroidal nucleus, nucleus in U or cylindrical in iron powder ferrite.

          Nowadays it exists a very important  increment of a higher fiability about the production systems.
          That means, the incorporation of more advanced tecnological equipments.
          In the same way, the great part of the citizens are incorporating continously modern electric devices and electronic equipments  that facilitate and improve us the every life day.
          All these news electric and electronic equipments that we are incorporating, have the inconvenience, of being very sensitive, therefore they can be highly affected by the phenomenon of the surges.
          For this reason, the installation of surge electric protectors against transitory surges in the electric lines,  allows to protect the installation and the equipments, wich are susceptible to this phenomenon.
          For a low additional cost we will be able to avoid big problems, such as the stops in production lines and damage in the equipments.